Hydro-Action HALT50-0101 Septic Air Pump Rebuild Kit

Hydro-Action HALT50-0101 Septic Air Pump Rebuild Kit

Hydro-Action HALT50-0101 Septic Air Pump Rebuild Kit

Overview

If your Hydro-Action HALT50-0101 Septic Air Pump has recently stopped working, you don’t have to rush to buy a new model just yet. Buying a new septic tank can be a costly experience. Instead of spending hundreds of dollars on a new model, you can rebuild your Hydro-Action HALT50-0101 Septic Air Pump for a fraction of the cost.

You can only rebuild your Hydro-Action HALT50-0101 Septic Air Pump if it has not been rebuilt before. Typically, septic air pumps should only be rebuilt once in their lifetime. Similarly, you must ensure your coils are properly working. If your aerator has a red dust build up inside of it, that means your coils are rusting. Instead of rebuilding your model, you will need to purchase an entirely new replacement air pump. If you need to replace the entire septic air pump, you can find a replacement Hydro-Action HALT50-0101 Septic Air Pump on Wholesale Septic Suppy’s website.

If you have determined your Hydro-Action HALT50-0101 Septic Air Pump can be rebuilt, the Hydro-Action HALT50-0101 Septic Air Pump Rebuild kit has everything you need. It includes two diaphragms and 2 mounting blocks. The kit also includes and air filter and a safety pin. It should take you approximately 30 minutes to tackle this DIY project.

This rebuild kit is for Hydro-Action HALT50-0101 pumps that are used for Hydro-Action HALT50-0101 aerators.

You (the customer) are responsible for making sure you are following all applicable laws and regulations in your area before replacing your septic air pump yourself. Hydro-Action is a trademark of A.K. Industries, Inc. Under no circumstances is Wholesale Septic Supply representing to the general public that it is an Authorized Distributor, Dealer, or is affiliated with those companies with whom we make product comparisons or with any products we sell.

Included:

  • 2 Diaphragms
  • 2 Mounting blocks
  • Air filter
  • Safety pin

You (the customer) are responsible for making sure you are following all applicable laws and regulations in your area before replacing your septic air pump yourself. Hydro-Action HALT50-0101 are Registered Trademarks of Clearstream wastewater inc. Under no circumstances is Wholesale Septic Supply representing to the general public that it is an Authorized Distributor, Dealer, or is affiliated with those companies with whom we make product comparisons or with any products we sell.

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question