The CPG1 1HP single seal grinder Pump a single phase grinder pump designed with size and electrical capability in mind. It can be purchased with a start and run capacitors in the motor or located in the control panel. The pump can also be made with seal failer option. .
PERFORMANCE
Heads up to 55’ TDH
Flows up to 42 GPM
MOTOR
Internal or external capacitor start/capacitor
run 115v or 208-230v; oil filled motors with
upper and lower ball bearings and thermal
overload protection
- Constant bearing lubrication
- Maximum motor cooling
- Runs cooler and lasts longer
- Internal overload protection
- Quiet operation
- Fasteners and shaft made from rugged,
corrosion resistant stainless steel
SEAL DESIGN
Single, Type 21 mechanical seal
IMPELLER DESIGN
Non-clog style, cast-iron vortex impeller
- Designed to generate higher heads and
reduce clogging by foreign materials
- Provides non-overloading performance
CUTTER ASSEMBLY
440 SST (56-60 Rockwell)
- 24,000 cuts per second and 1.5 million cuts
a minute
- Designed to reduce over loading and
clogging
POWER CORD
Sealed entry quick disconnect power cords
- Prevents water from entering the motor
housing through a cut cord
- Easy to replace in the field
- Available in lengths up to 100’
SWITCH
Piggy-back switch design
- Defective switches can be diagnosed over
the phone
- The pump can be operated manually or
supplied with other piggy-back switches
- The switch can be replaced without having to
replace the pump
Applications:
Residential developments, commercial
developments and wastewater
- High Efficient Motor With Upper & Lower Ball Bearings / Runs Cooler & Last Longer
- Cast Iron Impeller / Durable For Long Life
- Sealed Entry-Replaceable Power Cord/ Easy To Replace, Prevents Water From Entering the Motor Housing Through A Cut Power Cord. Warranty Is Not Voided If Plug Is Cut Off
-
Piggyback switch/pump can be run manually, allows the owner to keep pumping should the switch fails (Available only with a start capacitor, a and run capacitor in the motor)
- Every pump is tested at the factory in the in water to Ensure that the Pump motor runs correctly and meets head pressure & flow requirements.
- SSPMA Certified / Certifies That Pump Meets Industry Standards Heads Up To 55’ TDH
- Available In Single Phase
- Single Seal / Provides extra motor protection
- 1-1/4" or 2" Discharge
sku: cp1115