Installers preferred the 600N over other septic air pumps. They are used for 500-1500 gpd systems with larger systems using two pumps. The 600N replaced model CS103E and CS103ED and any other 500-600 GPD Clearstream system.
Clearstream moved to this model septic aerator after trying and failing to make its own unit. So after that negative experience, they went with the 600N. It has been used as the aerator of choice on their aerobic systems for over ten years now.
This is a plug and play unit; it will directly hook up to your system. You merely remover your old aerator and put this one in its very easy to connect as it 115v so just put the new wires where the old wires went and turn it on.
| Liters Per Min (LPM) | 80 |
| PSI (max continuous Operating Pressure) | 3.6 |
| Noise Level (dBA) @ 1 Meter | 36 |
| Current | 1.6 A |
| Rated Loading Pressure | 2.13 psi |
| Weight | 15.4 lb |
| Power Consumption | 71 W |
| Power Supply Frequency | 60 Hz |
2 Year Warranty Covering all Manufacturer Defects
3 Year Warranty on Electrical Components ONLY
P/N: HBL-AER-80-N22
does the pump run 24-7
Yes, the aerator is supposed to run nonstop it shouldn't turn on and off.
My model 600N is 16 years old. It is wired to two alarms; aerobic tank and two floats in the pump out tank. It’s also hard wired. Will this replacement handle this?
This air pump is compatible with your Clearstream tank, yes. If you're asking for a compatible control panel, you can use the Tran-T2 Model, it's easy to wire up and has an included timer.
