Key Features Specs Warranty Documentation The pump operation is on demand with a two float set up. The two floats are Pump On/Off float and Hi...
View full detailsKey Features Specs This control panel will operate a 120 VAC single phase 1/2 HP pump (or smaller). There are two circuit breakers in this con...
View full detailsKey Features Specs Warranty Documentation The pump operation is on demand with a two float set up. The two floats are Pump On/Off float and Hi...
View full detailsKey Features Specs Warranty Documentation The pump operates on demand with a three float set up. The three floats are On float, Off float and ...
View full detailsKey Features Specs Warranty Documentation The pump operates on demand with a three float set up. The three floats are On float, Off float and ...
View full detailsKey Features Specs Warranty Documentation The pump operation is controlled by an Omron H3CRF8 repeat cycle timer. With this timer, the pump ca...
View full detailsKey Features Specs Warranty The pump operation is on demand with a two float set up. The two floats are Pump On/Off float and High Water Ala...
View full detailsKey Features Specs Warranty Documentation The LPD-B2 is designed to operate a simplex lift station with alarm. This control can be used for pu...
View full detailsKey Features Specs Warranty Documentation The pump operation is controlled by an Omron H3CRF8 repeat cycle timer. With this timer, the pump ca...
View full detailsKey Features Specs Warranty Documentation The pump operation is controlled by a Grasslin Pin Timer. With this timer, the pump can be operated ...
View full detailsKey Features Specs Warranty Documentation The pump operation is controlled by a Grasslin Pin Timer. With this timer, the pump can be operated ...
View full detailsKey Features Specs Warranty This control does have a contactor that is used to start and stop the pump. This control is designed to operate ...
View full detailsKey Features Specs Warranty The pump operation is controlled by a Grasslin Pin Timer. With this timer, the pump can be operated on 15-minute...
View full detailsEach simplex control panel is designed to control a single pump. This style of control panel can sport a variety of features ranging from simple “on demand” style to panels with dosing timers.
Our LPD-B offers simple installation and basic functionality. This control panel offers a weather tight enclosure that can be used indoors or outdoors. Additionally, the LPD-B has a connection for a high-water alarm. If the water within the pump tank gets too high, a float switch can be used to trigger the alarm.
The LPD-DT controls the pump with a dosing timer. That type of timer allows the installer to specify an on cycle and an off cycle for the pump. The timer will allow the pump to activate for the specified amount of time, and the timer will keep the pump off for the specified amount of timer. This panel also has a connection for an override float switch that acts as a back up switch. If there is irregular flow into the system, the override float switch will activate the pump before the system overflows.
WSS also offers the LPD-G3F control panel. This panel is different from the others because it uses two float switches to control the pump. Most other panels use a single float to activate and deactivate the pump. The LPD-G3F utilizes an on-float switch and an off-float switch. The pump will not activate until the on-float is activated, and the pump will not deactivate until the off-float is deactivated.
