Call: (936)-681-8198
(936)-681-8198
Key Features Specs Warranty SJE-Rhombus Pumpmaster is the ideal float switch for 1/2 HP, 120V pump when directly connected and power is flow...
View full detailsKey Features Specs Warranty These high quality float switches are designed for pump duty loads. The float switch is as normally closed or pu...
View full detailsKey Features Specs Warranty Introducing the ATER WA13-20' Pump Float Switch, the ultimate solution for your wastewater pumping needs! This m...
View full detailsKey Features Specs Warranty Instead, a metal ball rolls back and forth inside of the float. When the ball rolls to one side, the contacts wi...
View full detailsKey Features Specs Warranty SJE-Rhombus Pumpmaster is the ideal float switch for 1/2 HP, 120V pump when directly connected and power is flowin...
View full detailsKey Features Specs Warranty The Pumpmaster float switch can also be used on 2 HP pumps that are running 220V as the amp draw is less on 220V m...
View full detailsKey Features Specs Warranty The Amp Pro Mechanical Float Switch is a specially made float that has 14 gauge heavy duty electrical wire with a...
View full detailsKey Features Specs Warranty Pump Duty Normally Open Mechanical Float w/30' Cord 115/230 VAC 50/60 Hz. IP 68 Protection Rating, come with weig...
View full detailsNarrow angle mercury float, pump down, 20 ft cord. 13 AMPS @ 120 VAC5 AMPS @ 240 VAC
Key Features Specs Warranty Pump Duty Normally Open Mechanical Float w/50' Cord 115/230 VAC 50/60 Hz. IP 68 Protection Rating, come with wei...
View full detailsNarrow angle mercury float, pump down, 30 ft cord and weight 13 AMPS @ 120 VAC5 AMPS @ 240 VAC
Narrow angle mercury float, pump down, 20 ft cord. with weight 13 AMPS @ 120 VAC5 AMPS @ 240 VAC
Overview:
Pump-Duty float switches used in residential septic systems are typically rated for around 13 amps and control power directly through an internal switch to your effluent or solids pump and typically come in two types:
Normally Open:
Normally-Open float switches default to the "open" state in which power cannot flow through the float switch. So until the water level in the septic tank rises to lift it up, your septic pump will remain off.
Normally Closed:
Normally closed floats default to the "closed" state in which power can flow freely through the float switch. Typically this means that when the float has been raised up by high effluent level, the septic pump will not receive power.
Typically, pump-duty floats will be wide-angle, meaning that the angle required to engage and disengage the pump-duty float will be approximately 90 degrees, vs something like 15 degrees with narrow-angle floats.