Little Giant WE20G05P4-21 High Head Effluent Pump with Float
4 Reviews
Description
Description
Little Giant WE20G05P4-21 High Head Effluent Pump, 1/2hp, 160ft. Max with Float
Please Note: The float switch and pump are not already wired together. The customer will need to connect the two items.
Overview
When in the market for a High Head Effluent Pump, Little Giant is one of the most reliable companies. Their products are known for durability and years of service. The Little Giant WE20G05P4-21 High Head Effluent Pump upholds the company’s high standards. 1 1/4" discharge
The Little Giant WE20G05P4-21 High Head Effluent Pump is the ideal pump for effluent pumping applications. The pump comes standard with stainless steel or thermoplastic discharge and motor brackets. They are both tough and non-corrosive. These materials are highly resistant to damage by minerals, metals, and other substances typically found in water.
The heavy duty product has a ceramic bearing sleeve, which makes the products extremely durable. The Little Giant WE20G05P4-21 High Head Effluent Pump is recommended by professionals, because the ceramic sleeve allows the pump to offer years of reliable service.
The Hex Rubber bearing on the Little Giant WE20G05P4-21 High Head Effluent Pump has an extra large surface, assuring shaft stability. The pump also feature multiple flow channels to keep particles away from bearing surfaces. The proven hydraulic staging allows close tolerances and increase performance, while the carbon phenolic upthrust washer prevents excessive wear in severe applications.
The Little Giant WE20G05P4-21 High Head Effluent Pump is build with a removable built in check valve on 10-20 GPM pumps. There is no built in check valves on high capacity pumps.
While the Little Giant WE20G05P4-21 High Head Effluent Pump should ideally be used for filtered effluent service, that is not it’s only application. The Little Giant WE20G05P4-21 High Head Effluent Pump can also be used for aeration. This pump is also perfect for ornamental fountains and waterfalls.
The water level around the pump should stay above the valve at the top of the pump. That means that the lowest point of the float switch controlling the pump should be above the valve. The life of the pump can be shortened if there is not enough water above the inlet of the pump.
You (the customer) are responsible for making sure you are following all applicable laws and regulations in your area before replacing your septic air pump yourself. Little Giant and WE20G05P4-21 are Registered Trademarks of Little Giant. Under no circumstances is Wholesale Septic Supply representing to the general public that it is an Authorized Distributor, Dealer, or is affiliated with those companies with whom we make product comparisons or with any products we sell.
