Horsepower: 2 HP Voltage: 230 V Phase: 1 Ph Amps: 13.7 Hertz: 60 Hz RPM: 3450 Discharge: 1-1/4" NPT Solids Handling: Slurry On/Off...
View full detailsKey Features Specs Warranty This specific model is equipped with a 1/3 horsepower (HP) motor and features a cast iron construction for durabi...
View full detailsDesigned to pass solids of up to 1/2 in size and move 10-65 GPM depending on the depth the pump is set. Features 1 1/2 NPT DISCHARGE. POWER COR...
View full detailsKey Features Specs Warranty The Ashland SW50 1/2 HP Sewage Pump is a powerful and robust pump designed for the efficient handling of raw sewa...
View full details*PLEASE CHOOSE WHETHER YOU NEED 115V OR 230V AS WELL AS WHETHER OR NOT YOU NEED A FLOAT WITH THIS* OPTIONS ARE LOCATED IN DROP DOWN ABOVE QUANTITY...
View full detailsKey Features Specs Warranty The Ashland SWH200 can handle 2-inch solids and has a 2" standard NPT flanged outlet with a 3" Optional adapter s...
View full detailsKey Features Specs Warranty Dimensions Ashland Effluent Pumps are trusted solutions for efficiently managing effluent and sewage water in a wi...
View full detailsKey Features Specs Warranty Ashland Effluent Pumps are trusted solutions for efficiently managing effluent and sewage water in a wide range ...
View full detailsKey Features Specs Warranty Cast iron casting, class 25-30 25000# tensile strength Oil-filled, hermetically-sealed, automatic reset thermal ov...
View full detailsKey Features Specs Warranty Designed to use in grey water and aerobic septic systems with sprinklers or drip tubing the ATER 10Series provides...
View full detailsKey Features Specs Warranty Designed to use in grey water and aerobic septic systems with sprinklers or drip tubing the ATER 30Series provides...
View full detailsWholesale Septic Supply offers a variety of submersible pumps. Whether you are looking for a sump pump, effluent pump, sewage pump, or grinder pump, we have got you covered.
We also offer pumps that have wide angle float switches and vertical float switches attached to the pump. These float switches allow the pump to activate and deactivate based on fluid level. When the fluid level is high, the float will activate the pump. When the fluid level is low, the float switch will deactivate the pump.
Wide angle float switches are often tethered to the pump, or they may be tethered to the pipe connected to the pump’s discharge. This type of float switch floats freely in the water and is easy to position within a water or septic tank.
Vertical float switches are built into the pump and cannot be removed. The float switch can only travel a short distance up and down, and that makes these float switches useful when space is limited. Instillation of pumps with vertical float switches is simple, because the position and connection to the float switch has already been done.
